White Plains Plumbing Company serves homeowners, landlords, property managers, and businesses across White Plains and Westchester County with the full range of residential and commercial plumbing work. From a single dripping faucet to a burst pipe at midnight, we handle repairs, installations, and emergency calls with straight answers and a price confirmed before anything is scheduled. Straight answers on the phone. Real plumbing work. Quick to respond.
We show up ready to work, whether that means clearing a stubborn drain, replacing a water heater, or scoping a sewer line that has been giving trouble all season.
Some homes need a full repipe. Others just need one faucet fixed. Either way, we handle it the same: figure out what is actually wrong, explain the options, and get the work done.
For homeowners, that might mean clearing a clogged drain in the kitchen, repairing a pipe leak behind a wall, or replacing a toilet that runs constantly. For landlords and property managers, it often means coordinating repairs across multiple units or scheduling fixture installations during a turnover. We work with all of them.
The everyday work we handle includes drain cleaning and clog removal, water leak detection and repair, faucet and fixture installation, toilet repair and replacement, garbage disposal installation and service, water pressure diagnostics, and shutoff valve replacement. When a drain backs up or a fixture starts leaking, the cause gets found before anything is replaced. That approach means honest recommendations on repairs, never an upsell, and work that addresses the real problem rather than the obvious one.
Call and we'll handle the leaks, drains, and fixtures.
Most plumbing problems give some warning first, and a water heater is no exception. Rusty water, a pilot that keeps going out, inconsistent temperature, or a tank that makes noise when it heats up are all signs that something needs attention before it becomes a cold-shower emergency.
We repair and replace tank water heaters and handle tankless water heater installation and repair. A visit starts with diagnosing what the unit is actually doing, walking through the options with you, and confirming the price before anything is scheduled. If a repair makes sense, we do the repair. If the unit is past its useful life, we go over replacement options that fit the space and the household demand.
When there is no hot water, calls are taken seriously and scheduling is arranged as quickly as the calendar allows. We show up ready to get to work.
The sooner you call, the sooner the water is back on, and that is exactly how we approach urgent calls. A burst pipe, a major leak, a sewer backup, or a sudden loss of hot water all call for a fast response, not a waiting list.
We take short-notice work across White Plains and the surrounding area. Emergency calls are answered seven days a week, from 7:30 AM to 9:00 PM. That covers the burst pipe discovered on a Sunday morning, the sewer backup that shows up mid-week, and the no-hot-water call that comes in on a holiday.
When you call, you get a real answer about what is available and what the work involves. No pressure and no gimmicks, just sound, lasting plumbing. Arrives fast. Fixes it right. Prices settled on the call.
Call and we'll get your water back on.
The housing stock in this part of New York is among the oldest in the country. That means galvanized steel supply lines, clay sewer laterals, and cast-iron drain stacks that have been in the ground for decades. It also means wet basements, cold winters, and infrastructure that has reached the end of its service life in a lot of homes. The three services below come up regularly in this area for reasons that are specific to where these homes were built and how long they have been standing.
Whole-home repiping involves inspecting the existing supply lines throughout the house and replacing them from the main shutoff forward. In White Plains, a significant share of mid-century and older homes still have original galvanized steel supply lines. Galvanized pipe corrodes from the inside out over time, restricting flow, discoloring water, and eventually leaking. When the problem is widespread rather than isolated to one line, repiping the home is the more practical fix. We assess what is in the walls, walk through the scope with you, and replace the supply lines in a way that restores full water pressure and removes the corrosion problem at its source.
Sewer line replacement covers the lateral running from the house out to the municipal connection. In Westchester County neighborhoods, many of those laterals are original clay or cast-iron pipe that has been in the ground since the home was built. Over time, tree roots intrude, joints shift, and sections collapse. We clear, repair, and replace sewer lines, and where the site conditions allow, trenchless methods can reduce the disruption to the yard. The work stays on the line itself. What happens beyond the connection point is a separate matter.
White Plains and the surrounding Westchester County area see significant seasonal precipitation, and nor'easters can deliver several inches of rain or snowmelt in a short window. Basements in this region are genuinely vulnerable to water intrusion, and a sump pump that fails during a heavy storm can mean a flooded basement before morning. We install, repair, and replace sump pumps, and we handle interior basement drainage work when the pump alone is not enough. If a pump is running constantly, cycling on and off, or not activating when it should, those are all signs worth calling about before the next storm arrives.
White Plains is our primary service area, and we work throughout Westchester County for both residential and commercial customers. That includes Yonkers, Scarsdale, Harrison, Tarrytown, Elmsford, and Greenburgh, along with the neighborhoods in between.
The right fix is the one that matches the pipe, not the quickest patch. That is how we approach every job, whether it is a single-family home in a quiet neighborhood or a multi-unit building with a plumbing issue on three floors. We take pride in the plumbing work we leave behind, and that shows in how we scope the job before starting and how we explain what was done when we finish.
If you are not sure your water pressure is where it should be, or you have a leak you have been putting off, the call is the right place to start. You describe what is happening, and we give you a straight answer about what it likely involves and what the work will cost before anything is scheduled.
That process works the same for a homeowner calling about one repair and a property manager scheduling service across several units. The price is confirmed on the call, and you are told what it covers. There is no commitment until you decide to move forward.
For work that needs a closer look before a price can be set, we explain that on the phone as well. You will know what to expect before anyone shows up. We show up ready to work, and the scope is settled before the job starts.
Emergency calls are answered every day from 7:30 AM to 9:00 PM, and we take short-notice work across White Plains and the surrounding Westchester County area. When you call, the scope and the price are settled on the phone before anything is dispatched, so there is no delay sorting out the details once the visit is underway. For a burst pipe or a sewer backup, describe what is happening when you call and we will confirm what is available and get the process moving.
If a pipe has burst or a major leak is active, locate the main water shutoff and turn it off to stop the flow. For a sewer backup, stop running water in the house and avoid flushing toilets until the line is cleared. For a water heater that is leaking, the shutoff valve on the cold water supply line feeding the heater will stop additional water from entering the tank. Do not attempt to open walls or access buried lines yourself. Describe what you have done when you call, and we will walk you through anything else that is safe and useful before we arrive.
Low water pressure at a single fixture usually points to a clogged aerator or a failing cartridge in that fixture. Low pressure throughout the whole house is a different situation, and in White Plains it often points to galvanized supply lines that have corroded from the inside out, narrowing the pipe's interior over time. A water main issue or a pressure regulator that has failed can also cause house-wide pressure loss. When pressure drops affect multiple fixtures or have been getting worse over time, that is worth a call, because the underlying cause tends to get worse rather than better on its own.
Discolored or rust-tinged water at the faucet, persistent low pressure across multiple fixtures, recurring small leaks at fittings and joints, and a water bill that has been climbing without explanation are all signs that the supply lines may be corroding from the inside. In homes built before the 1970s across White Plains and the surrounding area, galvanized steel supply lines are common and have a finite service life. When those symptoms show up together rather than in isolation, the pipe system is usually the cause, and repiping becomes a more practical solution than continuing to repair individual sections.
A camera scope involves running a small camera through the sewer lateral from an accessible cleanout point to get a direct view of what is inside the pipe. The footage shows root intrusion, pipe cracks, joint separation, buildup, and sections that have collapsed or shifted out of alignment. That information determines whether the line can be cleared and repaired or whether a section or the full lateral needs to be replaced. In older White Plains neighborhoods, clay and cast-iron laterals are common, and camera inspection is the most reliable way to know what the pipe is actually doing before any repair work is planned.
The price confirmed on the call covers the work as scoped based on the information available at that point. If the visit reveals a condition that was not apparent from the description, such as a second failure point found during a sewer camera inspection or a section of pipe that is more deteriorated than the symptom suggested, we stop and explain what was found before any additional work is added. Nothing is added to the scope without your approval. The goal is to keep the final cost consistent with what was discussed, and to be transparent when the situation requires a conversation before proceeding.
A tank water heater that is recovering more slowly or producing less hot water than it used to is often dealing with sediment buildup at the bottom of the tank, a failing heating element in an electric unit, or a thermostat that is no longer reading accurately. In areas with moderately hard water, like much of Westchester County, mineral scale accumulates inside the tank over time and reduces the effective capacity and efficiency of the unit. When the problem is persistent and the unit is older, replacement is often the more practical fix. A visit starts with diagnosing what the unit is actually doing so the recommendation is based on the real condition of the heater.
Water pooling around the base of the tank, rust-colored water at the hot faucet, a rumbling or popping sound when the unit heats up, or a pressure relief valve that is discharging water are all signs that a water heater needs attention. A unit that is leaking from the tank itself, rather than from a fitting or a valve, has usually reached the end of its useful life. A leaking pressure relief valve can point to a pressure problem in the system that goes beyond the heater. Call and describe what the unit is doing, and we will walk you through what the visit involves and what the options are.
Every repair and installation is tested before the job is considered complete. Pipe repairs are pressure-checked to confirm the fix is holding. Drain work is tested by running water through the line to verify the clog is fully cleared and flow is restored. Fixture installations are tested by cycling the fixture through its full range and checking the supply and drain connections for any weeping or drip. For water heater work, the unit is run through a heating cycle and the connections are checked. We do not leave until the work is confirmed.
For most jobs, yes, being present is the practical choice, because the plumber may need to ask questions about the system, confirm the scope, or get approval before additional work is added. For straightforward repairs where the scope is fully settled on the call and access can be arranged through a key, a lockbox, or a building contact, it is possible to work out an arrangement on the phone. Call and describe the situation, and we will work through what makes sense for the specific job.
Hidden leaks are found using pressure testing and electronic detection methods that identify where a line is losing pressure without opening up the surface first. Pressure testing isolates sections of the supply system to narrow down where the loss is occurring. Electronic detection picks up moisture signatures through finished surfaces. Together, those methods let us target the repair to the actual failure point rather than opening up large sections of wall or floor to search. Once the leak is located, the repair is scoped and priced before any surface work begins.
Repiping involves replacing the supply lines throughout the house from the main shutoff forward, typically with copper or PEX. The process starts with assessing what is currently in the walls, which in many White Plains homes means galvanized steel lines that have been corroding for decades. The scope and the timeline are worked out on the call and confirmed before work begins. Most whole-home repipes in a single-family residence are completed over one to two days, depending on the size of the house and how the existing lines are routed. We walk you through what access is needed and what to expect before the job starts.
Yes. The work is done to the standards that local code inspectors in White Plains and Westchester County enforce. That covers pipe materials, connection methods, fixture installation requirements, and anything else that falls under the applicable plumbing code for this area. If a permit is required for the work, that is confirmed before the job is scheduled. We explain what is involved and what to expect before anything starts.
White Plains Plumbing Company handles repairs, installations, and emergency calls across White Plains and Westchester County, seven days a week from 7:30 AM to 9:00 PM. Whether you need a drain cleared, a water heater replaced, a sewer line scoped, or a burst pipe repaired, the call is where it starts.
Call (914) 915-9829 to get a quote and get it on the schedule.
Built for homeowners. Ready for property managers. Ready for your pipes.
Every plumbing job we handle in White Plains starts the same way: you describe what is happening, we give you a straight answer about what it involves, and the price is confirmed before anything is scheduled. The table below covers the full range of work we do, who each service fits best, and a few practical notes to help you know what to expect. If a situation is not listed or you are not sure where it falls, a call is the fastest way to get a clear answer.
| Type of Job | What the Job Covers | When to Call | Helpful to Know |
|---|---|---|---|
| Sewer & Main Line Service | Camera inspection of the lateral, Root intrusion clearing, Line repair and replacement, Trenchless options where site conditions allow | Properties with slow drains throughout the house, sewage odor, or a lateral that has not been inspected in years | Clay and cast-iron laterals are common in older White Plains and Westchester County neighborhoods and have a finite service life. |
| Leak Detection & Repair | Pressure testing to isolate the failure point, Electronic moisture detection through finished surfaces, Pipe repair at the confirmed location, Supply and drain line coverage | Anyone with unexplained water damage, a climbing water bill, or a drip they cannot locate | Targeting the actual failure point first means less surface work and a more precise repair. |
| Water Softener Installation | Softener unit installation on the supply line, Bypass valve and connection work, Integration with existing supply plumbing, Pre-installation water assessment | Households dealing with scale buildup on fixtures, shortened water heater life, or water that leaves residue on surfaces | Water softener installation is a plumbing job. The softener connects to the supply line before it branches to fixtures, and the work is scoped and priced on the call. |
| Frozen Pipe Repair | Frozen section identification, Safe thawing and restoration of flow, Pipe repair where freezing caused a split, Assessment of vulnerable runs | Homes that lose water flow during or after a hard freeze, particularly in exposed or uninsulated areas | White Plains winters can push pipes in exterior walls and unheated crawl spaces to the freezing point. Catching a frozen pipe before it splits avoids a much larger repair. |
| Sump Pump & Basement Drainage | Sump pump installation and replacement, Pump failure diagnosis, Interior basement drainage work, Backup pump assessment | Basements in White Plains and Westchester County that take on water during nor'easters or heavy seasonal rain | A pump that cycles on and off rapidly, runs constantly, or fails to activate is showing signs of trouble before the next storm is the right time to call. |
| Toilet Repair & Installation | Running toilet diagnosis and repair, Fill valve and flapper replacement, Full toilet replacement, Wax ring and floor flange work | Homeowners with a constantly running, leaking, or weak-flushing toilet | A toilet that runs between flushes can add significantly to a monthly water bill before the cause is obvious. |
| Water Heater Repair & Replacement | Tank and tankless units, Diagnostic visit before any recommendation, No-hot-water calls handled as schedule allows, Supply line and valve work included | Households losing hot water, noticing rust-colored water, or dealing with a unit past its useful life | Westchester County water conditions accelerate sediment buildup inside tanks, which shortens recovery time and effective capacity. |
| Emergency Plumbing | Burst pipe response, Major leak containment and repair, Sewer backup clearing, No-hot-water calls | Any situation where waiting until the next business day would cause further damage | Emergency calls are answered seven days a week from 7:30 AM to 9:00 PM. The scope and price are settled on the call before anything is dispatched. |
| Lead Service Line Replacement | Identification of lead service line material, Full lateral replacement from the main to the meter, Connection to the existing interior plumbing, Inspection coordination where required | Older White Plains homes built before the mid-1980s that have not had their service line material confirmed | New York State has active requirements around lead service line identification and replacement. We confirm what applies at your address before the job is scoped. |
| Drain Cleaning & Clog Removal | Kitchen and bathroom drain clearing, Main line snaking, Slow drain diagnosis, Recurring clog assessment | Homeowners and property managers dealing with slow or backed-up drains | We find the cause before clearing the line, so the fix addresses the real problem rather than just the symptom. |
| Cast-Iron Drain Stack Replacement | Inspection of existing cast-iron vertical drain lines, Section or full stack replacement, Connection to branch drain lines, Code-compliant material and method | Multi-story White Plains homes with original cast-iron drain stacks showing rust, leaks at joints, or recurring drain problems on multiple floors | Cast-iron stacks in older Westchester County homes can corrode from the inside over decades. When multiple floors are affected, replacing the stack is more practical than patching individual sections. |
| Water Pressure & Shutoff Valve Repair | Pressure regulator diagnosis and replacement, Shutoff valve repair and replacement, House-wide pressure testing, Main shutoff assessment | Homes with pressure that has dropped gradually or a shutoff valve that no longer closes fully | Corroded galvanized supply lines are a common cause of low pressure in mid-century White Plains homes and can look like a regulator problem. |
| Garbage Disposal Service | Disposal installation, Jam clearing and reset, Replacement of failed units, Drain connection inspection | Kitchens with a disposal that hums but does not spin, leaks at the sink flange, or has stopped working entirely | A disposal that leaks at the bottom rather than at a fitting has usually reached the end of its useful life and replacement is the practical fix. |
| Faucet & Fixture Installation | Kitchen and bathroom faucet replacement, Showerhead and valve work, Fixture installation during renovations or turnovers, Supply line connection and testing | Homeowners upgrading fixtures or landlords scheduling work between tenants | Every fixture installation is tested through its full range before we leave, including supply and drain connections. |
| Whole-Home Repiping | Supply line assessment from the main shutoff forward, Galvanized steel replacement with copper or PEX, Full-house scope and timeline confirmed before work begins, Pressure testing after completion | Older White Plains homes with original galvanized supply lines showing rust, low pressure, or recurring leaks at multiple points | Most single-family repipes in this area are completed in one to two days depending on house size and how the existing lines are routed. |
What is the difference between a tank and a tankless water heater, and which is right for my home?
A tank water heater stores a set volume of hot water and keeps it ready at temperature. A tankless unit heats water on demand as it flows through the unit, without storing it. Tank units have a lower upfront cost and are straightforward to replace in kind. Tankless units take up less space and do not run out of hot water the way a tank can during high-demand periods, but they require adequate gas supply or electrical capacity and the installation is more involved. The right choice depends on the household's hot water demand, the existing infrastructure, and the space available. We walk through both options with you before anything is recommended.
How do I know whether a clog is in one fixture or in the main line?
A clog in a single fixture, such as a slow bathroom sink, usually means the blockage is in that fixture's drain line or trap. When multiple fixtures back up at the same time, or when using one fixture causes another to gurgle or overflow, the blockage is almost certainly in the main line rather than at the fixture. A washing machine backup that causes a floor drain to overflow is a common example. If the problem is showing up in more than one place, call and describe what is happening at each fixture. That information tells us a good deal about where in the system the blockage is before we arrive.
What does hydro jetting clear that standard snaking cannot?
A drain snake breaks through a clog and restores flow, but it does not clean the pipe walls. Grease, mineral scale, and debris that has built up on the inside of the line stay in place and the clog tends to come back sooner. Hydro jetting uses pressurized water to cut through the blockage and flush the buildup off the pipe walls, leaving the interior of the line clean. It is particularly effective on kitchen drain lines where grease has accumulated over time and on older lines with significant scale. We assess which method fits the situation before starting, because not every pipe and not every clog calls for the same approach.
Cause Found Before Anything Is Replaced
We diagnose the actual problem before recommending a repair or replacement. That approach means honest recommendations on repairs, never an upsell, and work that addresses the real issue rather than the most visible one.
How do tree roots get into a sewer line and what damage do they cause?
Tree roots follow moisture and nutrients, and a sewer lateral is a reliable source of both. Roots enter through small cracks, deteriorating joints, or gaps that develop as clay or cast-iron pipe shifts over time. Once inside, they grow and branch, eventually restricting flow and causing backups. In severe cases, the root mass can crack the pipe further or cause a section to collapse. Camera inspection is the most direct way to see what is inside the line. Clearing the roots restores flow, but if the pipe itself is cracked or has shifted, repair or replacement of that section is usually the next step.
When does a running or leaking toilet need a repair versus a full replacement?
A toilet that runs constantly is usually a fill valve, flapper, or float issue. Those are repair-level problems and are straightforward to address. A toilet that leaks at the base may need a new wax ring, which is also a repair. A toilet that rocks, has a cracked tank or bowl, or has a floor flange problem is a different situation and replacement is often the more practical fix. Age matters too. An older toilet that needs repeated repairs is often worth replacing rather than continuing to service. We assess the specific situation when we arrive and explain the options before any work is done.
What happens when a sump pump fails during a storm?
A sump pump that fails during a heavy rain or snowmelt event can allow a basement to take on water quickly, particularly in White Plains and Westchester County where nor'easters can deliver significant precipitation in a short window. If the pump is running but not moving water, the float switch or the impeller may have failed. If the pump is not activating at all, the motor or the switch is the likely cause. A pump that trips the breaker points to an electrical issue or a pump that is working too hard. Call and describe what the pump is doing. We can often narrow down the cause on the phone before the visit.
Older and Newer Plumbing Both Handled
White Plains homes span a wide range of ages and pipe materials, from galvanized steel and cast-iron stacks in mid-century houses to copper and PEX in newer construction. We work on all of it and scope the job to what is actually in the walls.
How do I know if my home's pipes need to be replaced rather than repaired?
When a single pipe section fails, repair is usually the right call. When failures are showing up at multiple points across the supply system, when water pressure has been declining throughout the house, or when the water runs with a rust or metallic tint at the faucet, the pipe material itself is usually the problem. In White Plains and the surrounding area, many older homes still have original galvanized steel supply lines that corrode from the inside over time. Repiping makes more sense than continuing to repair individual sections when the corrosion is widespread. We assess what is in the walls and walk through the scope with you before making a recommendation.
What causes a faucet or fixture to drip or leak after it has been in place for years?
Most dripping faucets come down to a worn cartridge, a deteriorated O-ring, or a seat washer that has broken down over time. The internal components of a faucet wear with use, and the rate depends on water quality, usage frequency, and the quality of the original parts. Mineral-heavy water accelerates wear on seals and cartridges. A faucet that drips at the spout usually has a cartridge or washer issue. A faucet that leaks around the handle or the base is more likely a failed O-ring or packing. In most cases, replacing the internal components restores the fixture. If the valve body itself is damaged, replacement is the more practical fix.
Scope Agreed Before Any Pipe Is Cut
The price and the scope are settled before work begins. If the visit turns up something that changes the picture, we stop and explain what was found before anything is added. No pressure and no gimmicks, just sound, lasting plumbing.
What is a shutoff valve and when does one need to be replaced?
A shutoff valve controls the flow of water to a fixture, an appliance, or the whole house. The main shutoff controls everything. Individual fixture shutoffs sit under sinks, behind toilets, and at water heaters. A shutoff valve that will not close fully, that leaks around the stem, or that is corroded to the point where it cannot be turned is a problem worth addressing before an emergency forces the issue. If the main shutoff fails during a burst pipe, there is no way to stop the flow at the source. We replace shutoff valves that are no longer functioning reliably, and we check the condition of the main shutoff when we are on site for other work.
When does a DIY plumbing fix make sense and when is it time to call?
Replacing a showerhead, swapping out a faucet aerator, or resetting a tripped garbage disposal are reasonable tasks for a homeowner comfortable with basic tools. Once the work involves cutting into supply lines, opening walls, working on a drain stack, or anything connected to the sewer lateral, the risk of making the problem worse or creating a code issue is real. Anything involving the water heater, the main shutoff, or a leak you cannot locate should be a call rather than a project. If you are not sure where the problem is or what is causing it, describe the symptoms on the phone and we will tell you honestly whether it is something to handle yourself or something that needs a visit.
How long does a water heater replacement typically take?
A straightforward tank water heater replacement in an accessible location, such as a utility room or basement, is typically completed in two to three hours. That covers removing the old unit, installing the new one, connecting the supply lines and the gas or electrical supply, and testing the unit through a heating cycle. Tankless installations take longer because the venting, gas line, or electrical requirements are more involved. Tight spaces, older connections that need updating, or a unit in an attic or crawl space add time. The scope and the timeline are confirmed on the call before the visit is scheduled so you know what to expect.
Call (914) 915-9829 and describe what is happening. We will give you a straight answer about what the work involves and confirm the price before anything is scheduled.
(914) 915-9829